REVERSE FLOW 5X3

This size smoker is our most popular in our line of Reverse Flow Smokers. This unit encompasses the space for the  BBQ enthusiast who want to cook with large  size capacities  and desires to cook low and slow for that real wood flavor. Cooking with the combination of charcoal and wood brings out that old time Southern BBQ flavor we’ve all grown to love.

***Call for Price***

REVERSE FLOW 5X3 SPECIFICATIONS

Overall Dimensions 59 1/2?H x 72?W x 40?D
Cook Chamber Material Thickness 3/16″ Metal
Fire Box Material Thickness 1/4″ Metal
Overall Weight 1450 lbs.
Charcoal/Wood Qty 25 lbs
Bottom Rack Size 64″ W x 39″ D
Middle Rack Size 64″ W x 33″ D
Top Rack Size 64″ W x 27″ D
Rack Spacing 6″ apart
# of Rack Runners 3
# of Rack 3
Color Black
Standard Features Insulated Single Cook Chamber Door
Reverse-Flow Design
Drip Pan with Built in drain
Heavy Duty Wood/Charcoal Basket
4 ft. Cooking Shelf

5X3 TRAILER SPECIFICATIONS

Overall Dimensions 6’W X 10’L Single Axle Trailer
Material 3/16″ Thick tube framing build “Stump Tuff”
Flooring 1/8″ Thick expanded metal flooring
Fenders Single Wheel steel fender w/skirt
Skirt Walls 1/8″ Thick Aluminum Tread Plate
Axle Type 5k Dexter Axle
Coupler 2″ Bulldog Coupler
Jack Manual jack w/sand foot
Trailer Lighting LED
Tire and Wheels (2) 15″ Trailer Radials w/white spoke rim
Color Black
Standard Features Wood Storage Area
Safety Chains

OPTIONAL ACCESSORIES

ATP Skirted Fenders $90.00
ATP Tandem Skirted Teardrop Fenders $180.00
Steel Tandem Teardrop Fenders $275.00
Aluminum Star Wheel Package (2) EA $365.00
Propane Double Burner $375.00
 Tongue Mounted Aluminum Storage Box $315.00

ORDER THIS COOKER

FREQUENTLY ASKED QUESTIONS

A Reverse Flow Smoker is an indirect heat smoker. This means there is a fuel off to the side and natural air movement and draw is used to move the heated air thru into the cook chamber. As it is drawn along under our vallified diverter plate the heat is evenly distributed across all areas of the cooker’s bottom pan as it moves under the plate to the end, then it reverses itself and flows (thus the nick name reverse-flow) and drafts back over the top of the heated diverter before exiting through the smoke stack.

The amount of “fire” is controlled by the amount of oxygen that is allowed in from the adjustable air dampers on front of the firebox. In this type setup the fire basket-full of fuel can all ignite at one time because oxygen is more prevalent in this type setup. So the burning area of fuel is of greater proportion in fire basket. At the rear of the firebox there is a opening that allows the heat/smoke to transfer from the firebox into the cook chamber.

So by controlling the amount of oxygen that is fed in, we can control the amount of “fire” inside the firebox and the temp and airflow as it moves through the cook chamber. Allowing the natural draft of the cooker to move the oxygen in will allow the temp to rise faster (helping to recover the heat in the cook chamber after the door has been opened). Letting it recover naturally through the air dampers is ALWAYS a better judgment than by leaving the door open. It takes a little longer but the control of the burn is more precise and will not allow a fire to get too hot.|

The heat/smoke moves through the cook chamber in a Reverse Flow Smoker much faster, therefore the cook chamber tends to be a drier environment thus lending for a lower and slower approach to create a nice moist cooking environment that doesn’t tend to cause meat to dry out as it is cooking.

Begin each new fire with the firebox door and chimney damper in the open position, this will facilitate more airflow in the fire building process. Reverse flow Smokers use charcoal as the base and wood a s the secondary component of their fire. therefore we recommend to always start your fire with just charcoal. Once you have a hot bed of charcoal, you can place two pieces of wood onto the coal base and close the door. As the wood reduces to coal close both dampers to the halfway position to allow the pit temperature to begin to rise. Once the pit stabilizes at the desired temperature, add your preferred mixture of charcoal and flavor wood and you are ready to begin cooking.

Wood selection is a matter of the Cook’s palette. Therefore, we have included some basic guidelines for selection. A wood that is going to be used should be either fruit or nut bearing. The most prevalent smoking woods include oak, hickory, pecan, peach, apple, cherry, and mesquite. The fruit woods produce a mild flavor with a slightly sweet finish. The oaks and other hardwoods produce a heartier smoke flavor and pecan can influence some meats with a hint of sweet. Flavor wood will also influence the color of the meat. Some pit-masters like to mix cherry and pecan which produces a cherry like color on the bark and a slight sweet smoke flavor. The other consideration when selecting wood is seasoned vs. green. Experienced pit-masters choose seasoned wood. Seasoned wood burns more predictably, which contributes to a cleaner burning fire and minimizes temperature spikes making pit management easier.

Build a fire in the firebox utilizing a good natural grade of charcoal (preferably oak or hickory). run the Smoker up to around 300 degrees and allow to cook for 3 hours. We normally prefer to use cooking oil on the racks and diverter plate to insure a good even sheen and buildup on the surfaces. After the cooking time has expired, close off the valve and allow the smoker to come below 150 degrees internal temp. The pit is seasoned and ready to cook on when a thin pecan colored sheen has developed on the interior surfaces.